Air Filtration for Flat Panel Display Manufacturing
Particle filtration for display manufacturing facilities, cleanroom air supply and compatible production equipment. Review the required grade, airflow and sealing arrangement for each filter location.
Separate facility air from local equipment needs.
Make-up and recirculation air
Review prefiltration and medium-efficiency configurations against the air-handling unit specification and operating airflow.
Cleanroom terminal sections
Match the specified HEPA or ULPA configuration to the available depth, face dimensions and sealing interface.
FFU replacement filters
Confirm the filter dimensions and gasket or gel-seal interface against the existing fan filter unit. The supply discussed here is the filter element.
Equipment and deep housings
Use equipment requirements for local filter replacements. Deep-pleat configurations are options for compatible deeper air-handling housings.
Start with the equipment specification.
Filtration requirement
Identify the required grade and test standard, the existing filter arrangement and the incoming-air conditions.
Fit and airflow
Check actual width, height and depth, sealing, operating airflow and the pressure limits of the equipment.
Maintenance
Review removal clearance, filter condition and pressure-drop trends. Follow the equipment and filter replacement instructions.
Explore filter configurations.
Select the product that fits the specified filtration stage. The options below are alternatives to review, not a fixed sequence for every installation.
Ambient-Temperature Pre-Filter
Frame and construction options for compatible ambient-temperature ventilation systems.
View Product ↗
V-Bank Filter
Compact V-bank configurations for compatible higher-airflow filter sections.
View Product ↗
Mini-Pleat HEPA & ULPA Filters
Select the specified grade and depth for compatible terminal or equipment installations.
View Product ↗
Gel-Seal HEPA & ULPA Filters
Gel-seal configurations matched to the specified installation interface.
View Product ↗
Deep-Pleat Separator HEPA Filters
Deep-frame configurations for compatible air-handling housings.
View Product ↗
Mini-Pleat Filter
Compact medium-efficiency configurations for equipment with limited filter depth.
View Product ↗Prepare your filter enquiry.
Send the existing filter label, photographs and measurements together with the equipment requirements.
Include the specified frame material, gasket or gel-seal interface and any equipment-specific material requirements.
- Equipment model and existing filter reference
- Actual width × height × depth and sealing details
- Required grade, test standard and operating airflow
- Temperature, moisture conditions and permitted pressure drop
- Required quantities and delivery destination
Before you select a replacement.
Can a thin terminal filter replace a deep-pleat filter?
Check the complete installation and airflow specification. Different depths, frame interfaces and pressure characteristics are not automatically interchangeable.
Do you supply complete FFUs through this range?
This range covers filter elements for compatible FFU installations. Supply described here does not include the fan, controls or complete unit.
How often should these filters be replaced?
Use equipment instructions, filter condition and pressure-drop readings where available. Replacement intervals vary with operating hours and particle loading.
Can you review a non-standard filter size?
Send the required dimensions, construction and equipment details. Available configurations and supply requirements can then be confirmed.
Let’s review your requirements.
Share your current filter details and required quantities to discuss the appropriate configuration.
Discuss Your Requirements ↗